{"id":1463,"date":"2011-01-21T22:28:38","date_gmt":"2011-01-21T20:28:38","guid":{"rendered":"http:\/\/modeltalking.hobbyart.sk\/?p=1463"},"modified":"2014-12-28T22:07:42","modified_gmt":"2014-12-28T20:07:42","slug":"gates-learjet-revell-148","status":"publish","type":"post","link":"http:\/\/modeltalking.hobbyart.sk\/?p=1463","title":{"rendered":"Gates Learjet, Revell 1\/48"},"content":{"rendered":"

\"\"
\n<\/a> Thi is my 1\/48 scale Gates Learjet C-21 kit released by Revell Germany. This kit was formerly released by Hasegawa.<\/p>\n

\"\"<\/a><\/p>\n

<\/address>\n

Introduction<\/span><\/h2>\n

Starting to build this lovely plane I told myself:\u00a0 “build it quickly, straight out of the box, without detailing!”\u00a0At least that was a plan.<\/p>\n

\"\"<\/a><\/p>\n

Construction<\/span><\/h2>\n

I wanted to build the military version of a Learjet. After a closer look I recognized there were the engines used with the civil Learjets inside the box. After a while I started with fixing this problem an then \u2013 to my surprise – rebuilding this kit part after part.<\/p>\n

Engine Corrections<\/span><\/strong>
\nI tried to remake the shape of the rear part of engines and their pylons at first. Then I add a styrene plates inside of the Jet intake walls – to push them closer to the reality.<\/p>\n

\"\"<\/a><\/p>\n

I also had to scratchbuild the covers of an outflow reversal mechanizms and slightly changed the shape of the reversal\u2019s edging.<\/p>\n

Interior<\/span><\/strong>
\nI intended to make my Lear with opened door, so some detailing inside a plane looked like necessary to me. I started with remaking the seats but I rather made them brand new then – according to the gained photographs.<\/p>\n

\"\"<\/a><\/p>\n

\u00a0Unsatisfied with the \u201eholes\u201c in the side walls (around the windows – see lower photograph) I tried to fix it covering the inner walls with a 0,2mm styrene plates. This is the window area – former stage – made straight out of the box:<\/p>\n

\"\"<\/p>\n

And after covering the inner walls:<\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a>After I had rescribed the panel lines and closed the kit, the new surprise appeared! Watching the photographs I realized that the most of USAF LearJets (C-21A) have more windows then civil versions (35A)! So building this military Lear, you should add one window on the side where the door is. The number of windows on the opposite side is correct, but I also saw the LearJet with the 4 windows and also 5 windowed Lears but all the windows were moved one step (the window\u2013to\u2013window distance) backwards. I decided not to repair my window problems this time. The next Lear ? May be\u2026<\/p>\n

Undercarriage, Lights and other details<\/span><\/strong>
\nI made some minor changes to the undercarriage too. The nose wheel was molded as one piece with the strut. After cutting the wheel away from the strut (damaging the wheel) I had to make the new wheel (of a styrene) and a new axle. The main undercarriage was upgraded with brake hoses and \u201cthe epoxy drops\u201c onto the front and flattened surfaces made the landing lights.<\/p>\n

\"\"<\/a><\/p>\n

\u00a0This technique was also used for the anti collision lights cover on the tail and new drop-like shaped position lights (both wing tanks, bottom of fuselage and tail top). The lights which are on the front of both wing tanks (these lights have black inward halves) were made of spare missile transparent heads (in 1\/32 scale). The fuel tanks also acquired the metal tubes at their rear bottom ends.<\/p>\n

\"\"<\/a><\/p>\n

And some more little additions were made when finishing the kit: the various new probes were scratchbuilded using very thin metal quilting needles, thin styrene and metal aluminum foil. The foil was used also for the door details. The antennae cords were made of 0,1mm silon and heat stretched after gluing into the ending holes.<\/p>\n

Painting and Markings<\/span><\/p>\n

The white finish was an experiment with multiple airbrushed layers of highly polished Mr. Base White 1000 and then covered by Mr. Color Gloss Super Clear. The rescribed panel lines were accented using light grey Vallejo color + dish washing soap mixed 1:1. As I made it, the lines seemed too dark on the white surfaces, so I had to calm lines down using the acrylic white color + soap + water.<\/p>\n

\"\"<\/a><\/p>\n

After decalling and weathering – applying various kinds of \u201cdirt\u201c I sprayed Mr. Color Semigloss Super Clear on top (The windows have been masked all the time of course). Shiny metal parts are ALCLAD II Polished Alluminium, with exception of the engine exhausts, where the Model Master Metallizer was used, polished and then oversprayed lightly using brown color.<\/p>\n

Masking<\/span><\/strong>
\nI had unpleasant feeling when masking the metal surfaces of the engine intakes – frontal edges and especially the narrow inner parts of them. These surfaces have curvatures in two axes, so it was not easy to mask them\u2026 cutting very thin band of masking tape solved this problem.<\/p>\n

\"\"<\/a><\/p>\n

I used the original Revell decals to make LearJet C-21A with a Serial number 40081 United States of America in Europe (Lower photograph). The decal sheet includes the numbers in range for various USAF and USAFE serials.<\/p>\n

\"\"<\/a><\/p>\n

Conclusion<\/span><\/p>\n

So what is left to say in the end? I can say it was exciting to build this old and inexpensive – but still very interesting – kit of a famous plane. Do not hesitate to try it too.<\/p>\n

My special thanks to:<\/span><\/h2>\n